Norma NSC 10: Tabla de cadenas - 5/16" Grado 80 WLL
| Fecha de registro | 17 de julio de 2009 |
|---|---|
| Número de asunto | 09-032-VEH |
| Nombre | Mr. J-M Thibodeau |
| Agencia | New Brunswick Department of Public Safety - Commercial Vehicle Enforcement |
| Dirección | 414 Collishaw StreetMoncton, NB, E1C 3C7CanadaVer en el mapa (se abre en una pestaña nueva) |
| Teléfono | 506-853-7185 |
| Fax | (506) 856-2006 |
| Correo electrónico | [email protected] |
| Comité | Comité de Vehículos |
| Estado | Cerrado |
| Resumen del asunto | La "Tabla de cadenas" copiada de la Norma 10 del Código Nacional de Seguridad (NSC): Para una cadena de 5/16", ¿una cadena de grado 80 tiene una carga de trabajo segura (WLL) menor que una de grado 70? Esa es la única vez que se presenta tal anomalía en esa tabla y aquí en Canadá está causando algunos problemas. |
| Justificación o necesidad | No parece tener sentido. |
| Solicitud de acción | ¿Podrían indicarme si se trata de un error tipográfico? |
| Medidas adoptadas por el comité | Information received from the chain manufacturers' is as follows:NACM specifies the material diameter for the various grades of chain. On Grade 70 they specify .343" wire diameter and allow the minimum to be -7% from that. Example"5/16" Grade 70 Trade Size" chain can be made with wire as small as .319\". On Grade 80 & Grade 100, NACM specifies the wire diameter to be .315" and allows the minimum to be -3% of that. Example "5/16" Grade 80 Trade Size" chain can be made from wire as small as .306\" The smaller wire diameter cannot carry as large of a load per "Trade Size" on this size of chain. The reasoning behind this wire size on the 5/16" Grade 80 & Grade 100 is to allow for clearances in the many various fittings and attachments that must be used in overhead lifting applications for alloy chain. Section 6.2 of NACM is where the wire specification addressed. Based on the above information, the chain chart in the NSC Standard 10 and FMCSRs is correct and not a typo. |